Jfa 46 (2012) Zum Verkauf

JF ANDRE CROZET 46
Crozet, plan JF André,
hull from 2008, first launched in 2012
Refit from 2022 to 2024
Aluminum construction + insulation (between 6 and 18 cm extruded polystyrene, above the waterline)
3 double cabins / 1 shower room
Integral dinghy draft 0.85 m / 2.90 m
Waterline length : 12.30 m
Length HT: 13.80 m, extended to 14.70 m by the addition of a welded aluminum dolphin
Beam : 4.40 m
Air draft: 17 m
Weight: 13500 kg
Ballast: 4000 kg
Water capacity: 400 L (3 tanks)
Diesel capacity: 900 L (3 tanks)
Engine YANMAR 4JH4E 54 hp Diesel from 2012 - 2178 H – Major overhaul carried out in 2024
2015 J-Prop 3-Light Bronze Propeller
New standing rigging
1 mainsail full batten Armor hydranet sail from 2012 - 43 m² new mainsail, overhauled in 2021
1 Armor furling genoa hydranet sail from 2012 - 56 m², overhauled in 2021
1 Solent, revised in 2021
1 2012 Reef staysail on carabiners on low fixed prop - 27 m²
1 asymmetrical spinnaker
New genoa furler
2 outriggers
Lazy jack
SGS Cover
Andersen 58 ST / 52 ST / 40 ST winches
Mainsail sheet rail on roof cap
Mast foot balcony
Lofrans Tiger 1200 W Electric Windlass
Aluminium Delphine pad added in 2023
Double davit + 1 aft davit
Aluminium gantry crane with davits
1 x 150 W solar panel on gantry
Wind pilot (2012)
Rear platform
Seawater wash pump
Fold-down cockpit table
Second helm station in the saloon
Fridge (new)
Gas oven with 2-burner stove
New SCHENKER watermaker (never used) Zen 30L/h 12V
Eberspacher 4 KWS air heater (recent)
Hot water tank
Electric marine toilet with black water tank
220 V shore power outlet with battery charger
5 Battery Bank August 2023, Victron AGM 12 V / 165 AH
Electronics:
Durabook computer with standard Adrena V19
GPS positioner FURUNO GP32 (2012)
VHF ICOM ICM 411 ASN (2012)
NKE Sounder (2012)
Lock / speedo NKE (2012)
NKE wind vane anemometer (2012)
NKE Repeater (2012)
BLU ICOM ICM 803 Transceiver (2012)
ICOM MA 500 TR AIS Transceiver (2012)
FURUNO Radar (2012)
NKE autopilot with gyro compass
External iridium antenna
Epirb Tag
Sandblasting, sanding and painting of deck, hull, appendages and spars
Cleaning of all tanks (diesel, water) and all bottoms
Creating a chart table
Creation of a third double cabin and a shower room
Creating a Oilskin Closet
Complete refit of the large table in the saloon with storage
Complete interior makeover with CP veneers and painting of the entire interior
New kitchen sink and faucets
Complete electrical circuit (new panels), mast cables, lighting and plumbing
New mullet lives
Swim ladder on aft platform
Offshore armament
New anchor chain 75 m, diameter 12 with length markers
2.50m Inflatable Tender + Kicker TrustMe Electric Motor from 2024
For more information and visits, please contact Mahé NAUTIC on 06 59 84 61 73 and on info@mahe-nautic.fr