Jeanneau 53 (2010) En vente

A transformer was installed here in the US. Shore power is 220V/60HZ and the transformer allows 110V/60HZ to the 17 outlets, the generator is set for 220V/60HZ like the A/C units, etc. All to US Marine Standards.
The vessel was a 4 cabin 4 head layout - converted into an owner's layout. While in France the original owner had the 2 fwd cabins converted to one. This gives you a King-Size berth and His/Hers heads.
PERSEVERANCE has her 3rd owner so she's had 3 surveys and all her experienced Yachtsmen have kept her in top condition. She still shows like new and the continued additions to her maintenance and inventory are evident.
If you are looking for a French pedigree and a fast, comfortable yacht, then this is your opportunity to continue her legacy. Her standing rigging was just replaced due to insurance regulations and not a condition. Now with an added Furling Staysail, she will be a contender for any regatta.
PERSEVERANCE is a head turner in any marina.

KEY FEATURES
King-size berth in the forward stateroom with his/hers heads.
All New Standing and Running Rigging including the addition of a Furling Staysail
Aluminum Arch with dinghy Davit and Solar Array
All New Sunbrella Cushions, Bimini, Dodger Hatch Covers, Window Covers, Lifeline Covers, Transom Helm & Rail Seating, Helm Wheel Covers, and Winch Covers
Tall Rig with all recent or new sails
Less than 100 hours on her Engine and Generator per year since new.
One of the cleanest and most equipped Jeanneau 53's on the water.

DECK EQUIPMENT
January 2022 All Teak Re-Finished
January 2022 Cockpit Table Re-Finished
February 2022 New Canvas Bimini
February 2022 New Dogger with Roll-Up Window
February 2022 New Upholstery & Cushions
February 2022 All New Sun-Brella Hatch, Port & Window Coverings
February 2022 4 Programable LED Spreader Spot Lights to Illuminate the Entire Decks
February 2022 2 Programable LED Stern Spot Lights to Illuminate Stern and Transom
Forward Bow cushion just ahead of the Staysail deck traveler
Aluminum Arch with dinghy Davit and Solar Array
STEMHEAD FITTING in stainless steel with double anchor rollers and attachment point for asymmetrical spinnaker
ANCHOR WINDLASS 1500W/12v with a chain wheel for 12mm / 1⁄2” chain and a line drum mounted on deck
PROTECTIVE TRIM to keep the chain from chaffing on the deck
ANCHOR LOCKER with access from the deck and location for manual handle and bitter end attachment point
OPEN BOW PULPIT in stainless steel
DOUBLE LIFELINES in stainless steel wire
Lifeline padded Covers (April 2022)
LIFELINE GATES located just aft of midships to either side
TEAK DECK-EDGE PROFILE runs from stem to stern to finish hull-to-deck joint and provides a foothold for safety. Refinished 2022
MOORING CLEATS in aluminum:
• 2 at the bow • 2 midships
• 2 at the stern
MAST STEP (deck-stepped mast) in anodized aluminum with Harken blocks
OPEN FAIRLEADS in stainless steel:
• 2 at the bow
• 2 forward quarters • 2 midships
• 2 at the stern
MAIN CHAINPLATES in stainless steel
LARGE DECK HATCH (70cm x 70cm / 27” x 27”) providing access to forward sail locker or optional skipper cabin. Hatch can be locked and has non-skid tape applied to the surface.
OPENING LOW-PROFILE DECK HATCHES on the foredeck
• 2 opening deck hatches (51cm x 51cm / 20” x 20”) over forward cabin with integrated ventilators
• 2 opening deck hatches (33cm x 33cm / 13” x 13”) over forward washroom/cabin
FORWARD COACHROOF WINDOWS drape-formed in 15 mm / 19/32” acrylic and bonded to deck
LATERAL COACHROOF WINDOWS drape-formed in 10mm / 3/8” acrylic and bonded to deck.
2 OPENING PORTS integrated behind fixed windows.
OPENING LOW-PROFILE DECK HATCHES on coachroof
• 3 forward opening deck hatches (51cm x 51cm / 20” x 20”) with integrated ventilators
SPINLOCK DECK ORGANISERS on each side
LONG HARKEN TRAVELLER WITH BALL- BEARING CAR and control lines led aft to the cockpit
SPINLOCK LINE STOPPERS on coachroof

FOLDING PADEYES on deck for spin