REF1533: As a Centerboard Sparkman & Stephens project, this CNC 51 custom built sailing yacht, built in France in 1982, is perfect for ocean cruising and liveaboard. She is maintained in very good condition by her owners, receiving regular annual maintenance. She is powered by a Perkins Model 3654.4-130HP and fitted with Generator, Bow thruster, Wind generators, GRP dinghy with outboard, Genoa Roller Furling Reckmann (2010), Mainsail boom roller electric & manual (2012) and other sails. She accommodates 5 guests in 3 cabins that are served by 2 WC/Showers. Fitted with a centerboard/retractable keel (1.00-2.80m) and rudder. The retractability allows the centerboard to be raised, to operate in shallow waters, to move the centre of lateral resistance (offsetting changes to the sailplan that move the centre of effort aft), to reduce drag when the full area of the centreboard is not needed, or when removing the boat from the water, as when trailering. She has double steering with a cockpit cable steering system and a hydraulic pilot steering place inside..She is EU VAT exempted. You are welcome to contact Alvea Yachts about this Sparkman & Stephens project - CNC 51 for sale.
General info
REF: 1533
Builder: CNC Custom 51 Centerboard - Sparkman & Stephens project
Model: Custom 51
Type: Ketch
Year: 1982
Country of Built: France
Flag of Registry: UK
VAT: EU VAT exempted
Dimensions
Draft: 1.00m-2.80m Centerboard/retractable keel and rudder
Tanks
Fuel Tanks (lts): 2 tanks 1350
Fresh Water Tanks (lts): 3 tanks 1000
Materials
Hull: GRP
Deck: GRP
Interior Wood: Teak Wood Veneer
Vessel's colour: White
Accommodation
Guest Cabins: 3
Guest Berths: 5
WC: 2
Engines
Brand: Perkins
Model: 3654.4
Power: 1 X 130HP
Type of Drive: Shaft
Type of Fuel: Diesel
Bow thruster: Vetus 6KW
Generator
Manufacturer: Onan 2 cylinder
KW: 5
Navigation & electronics
GPS/Plotter: VDO MAP7
Autopilot: Simrad AP16
Echosounder: Danavigate 7000 - Humminbird Piranha Max 210
VHF with DSC/GMDSS: Shipmate RS8000
Speed
Cruising (Knots): 6
Maximum (Knots): 8
Equipment
Dinghy: Dinghy GRP 3.60m with outboard
Sails
Genoa Furling System: Roller Furling Reckmann (2010)
Main Sail Furling System: Boom roller electric & manual (2012)
Main Sail Fully Battened: Yes
Jib Furling Type: Headsail UK Sails
Rigging: Of 2007
Yacht's Information
REF1533: As a Centerboard Sparkman & Stephens project, this CNC 51 custom built sailing yacht, built in France in 1982, is perfect for ocean cruising and liveaboard. She is maintained in very good condition by her owners, receiving regular annual maintenance. She is powered by a Perkins Model 3654.4-130HP and fitted with Generator, Bow thruster, Wind generators, GRP dinghy with outboard, Genoa Roller Furling Reckmann (2010), Mainsail boom roller electric & manual (2012) and other sails. She accommodates 5 guests in 3 cabins that are served by 2 WC/Showers. Fitted with a centerboard/retractable keel (1.00-2.80m) and rudder. The retractability allows the centerboard to be raised, to operate in shallow waters, to move the centre of lateral resistance (offsetting changes to the sailplan that move the centre of effort aft), to reduce drag when the full area of the centreboard is not needed, or when removing the boat from the water, as when trailering. She has double steering with a cockpit cable steering system and a hydraulic pilot steering place inside. She is EU VAT exempted. You are welcome to contact Alvea Yachts about this Sparkman & Stephens project - CNC 51 for sale.
General info
REF: 1533
Builder: CNC Custom 51 Centerboard - Sparkman & Stephens project
Model: Custom 51
Type: Ketch
Year: 1982
Country of Built: France
Flag of Registry: UK
VAT: EU VAT exempted
Dimensions
Draft: 1.00m-2.80m Centerboard/retractable keel and rudder
Tanks
Fuel Tanks (lts): 2 tanks 1350
Fresh Water Tanks (lts): 3 tanks 1000
Materials
Hull: GRP
Deck: GRP
Interior Wood: Teak Wood